Battery capacity detector test and use

1. Connect to connect detector fixture and Battery Terminal Terminal (Terminal) ('), follow the Battery safe use rules. Red line connect battery positive electrode, the black battery cathode. Shaking jig let clip teeth into, make its can contact with the battery terminal terminal limit. In the connection process (guo cheng) need to pay attention to the following items:

(1) to ensure that the detector Terminal Terminal (Terminal) closely connected with the battery Terminal Terminal. If the connection is not tight, or grounding connected with the car, will influence the test results. Each fixture 2 grip tightly terminal of the battery terminal. (2) before the test, turn off all connected to the electricity components and charger.

(3) connected to the electrical components on the battery and the charger will not affect the testing process, but will affect the charging effect and the accuracy of the test results. (4) when the thing has a connection on the battery, the detector alarm bell will ring, screen shot. If the battery voltage is lower than 10 v, a black screen. (5) the second restart the detector for detection, has just put a clip from Terminal Terminal (Terminal), to reconnect. 2. The test set

Battery capacity detection requirements to the detector input related information before testing. The detector with the battery connection, detector will remind input relevant information. (1) set up the battery model

Or < >, key, keys to choose the test Battery (') model, choice of content is surrounded by a flashing rectangular box, press the enter key selected content accordingly. Comprehensive tester does not need to discharge battery accurately measure the internal resistance and estimate capacity, found behind the battery in advance, to ensure the safe operation of the battery power supply system, and guide the battery in the correct parameters, prolong the service life of battery, alarm for abnormal condition. (2) set the classification standards

>; Or <; Select the test battery grade classification standard, the selected values surrounded by flashing cursor, press the enter key selects the selected value, detector will be according to the standard output of the selected test results. Sell instruments usually on a battery grade classification standard, or according to the analysis of the storage battery can determine its standard.